PM0.1BD
Active SpeakerThe PM0.1BD allows users to enjoy subscribe music and video streaming in high sound quality in a compact size. The single-driver speaker unit not only reproduces a sharp sound image with excellent localization, but also provides a wide range with total sound tuning, offering a sound space beyond its size anywhere with ease.
Movie
Features
Newly designed 75mm (3inch) full-range single driver
Equipped with a full-range single driver that reproduces a sharp sound image with straightforward sound quality from low to high frequencies. Combined with the compact size of the main unit, point source reproduction can be easily realized and a realistic sound field can be felt.
Bluetooth and analog (AUX) input support
The AUX input can be switched between Bluetooth for smartphones and analog for audio interfaces. (Bluetooth 5.0 SBC)
Wooden enclosure with isolated structure
The natural-sounding wooden enclosure has a structure that separates the enclosure from the amplifier section, eliminating the effect of sound pressure from the back of the driver on the amplifier’s electronic circuitry. The R channel (active side) and L channel (passive side) are of the same construction to minimize differences in sound quality caused by left-right differences. The amplifier section is a D-class 15W + 15W high-power amplifier that powerfully drives both the R and L channels.
Volume adjustment and input source selection can be done on the front panel
The volume knob and input selector on the front of the main unit ensure excellent operability.
Power-saving mode to reduce power consumption
A power-saving mode is provided to reduce power consumption when no signal is input (silent state) for a certain period of time.
Product Image
Specifications
Main Specifications
general | |
---|---|
Enclosure type | bass reflex system |
Unit | 75 mm cone full range |
Amplifier output | 15 W + 15 W |
Frequency Response | 110 Hz~20 kHz |
External Dimensions | 110 mm (W) x 153 mm (H) x 150 mm (D) |
Weight | 2.4 kg (1 pair) |
Bluetooth | |
Communication system | Bluetooth standard Ver. 5.0 |
Output | Bluetooth standard Power Class 1 |
Communication distance | Approx. 10 m *When there are no obstacles |
Used frequency band | 2.4 GHz band |
Supported profiles | A2DP |
Supported codecs | SBC |
Supported Content Protection | SCMS-T method |
Transmission bandwidth | 20 Hz-20 kHz |
AUX | |
Connector | Stereo mini jack |
Input Sensitivity | 500 mVrms |
Maximum input | 2 Vrms |
Power supply unit/AC power adapter | |
Input | AC 100 V-240 V (50 Hz/60 Hz) |
Output | DC 15 V 3.2 A |
Accessories | |
AC power adapter, speaker cable (1 m), safety precautions, operating instructions |
Attention
Bluetooth specification
Frequency band: 2400 MHz – 2483.5 MHz
RF output: ≤ 14.5 dBm (e.i.r.p., Equivalent Isotropic Radiation Power)
Safety Precautions – Bluetooth – Bluetooth
Caution.
This product uses radio waves in the 2.4 GHz band used by devices such as microwave ovens. If this product is used in the following locations, problems with transmission/reception may occur. 1.
1. where there is radio interference from devices such as wireless LAN or microwave ovens that use the 2.4 GHz band, the signal may not be received. 2.
2. noise may be generated when used near a radio.
If noise is generated on a TV when used near a TV set, place this product away from the antenna input terminal.
Prohibition
Do not use this product in crowded places such as crowded trains or medical institutions such as hospitals where radio waves may affect cardiac pacemakers or medical electrical/electronic equipment. 2.
Do not use the Bluetooth function in aircraft. 3.
3. do not use this product near automatic doors, fire alarms, or other automatic control devices.
4. if radio interference or other problems occur with other equipment while using this product, stop using this product immediately.
The Bluetooth® word mark and logo are owned by Bluetooth SIG, Inc. and used by Foster Company/Foster Electric under license.
This product is intended for consumer use.
Specifications and appearance of the product are subject to change without notice for improvement.
The colors of the product may appear different from the actual colors due to shooting and printing.