C045A8
Full Range SpeakerSales unit is 1 box (20 units).
Features
Lightweight design with neodymium magnets and glass fiber reinforced plastic frame
The magnetic circuit, which employs neodymium magnets, is an internal magnetic type with low flux leakage and minimal impact on peripheral devices.
Diaphragm design less susceptible to water splashes
The surface of the diaphragm is splash-proof (*) to prevent harmful effects from water splashes. Can be incorporated into voice guidance systems installed outdoors.
When the speaker unit is mounted on the structure as shown in the photo below and only the speaker surface is exposed to the outside, it is splash-proof (IPX4).
UDR tangential edge reduces excessive amplitude for high input resistance
Smooth characteristics are achieved even at high volume levels due to its high structural strength and resistance to specific peaks.
Faston #205 terminal lugs are used for both positive and negative poles
Smooth characteristics are achieved even at high volume levels due to its high structural strength and resistance to specific peaks.
Faston #205 terminal lugs are used for both positive and negative poles
Specifications
Main Specifications
model (e.g. of a vehicle) | 4.5 cm cone full range |
---|---|
impedance | 8 Ω |
Lowest resonant frequency | 320 Hz |
Playback frequency band | f0~40 kHz |
Output Sound Pressure Level | 79 dB/1 w(m) |
input | 5 W(NOM) |
Mo | 0.79 g |
Qo | 1.78 |
Effective vibration radius | 3.4 cm |
VAS | 0.05 L |
mass | 31 g |
Baffle opening dimensions | 44 mm dia. |
Waterproof grade | IPX4 (Note: Not supported as a standalone unit. Compatible when installed as shown in the above figure) |
Dimensions and mounting aperture |