• HOME
  • Professional Speakers
  • 6301NX
6301 Series

6301NX

Active Speaker
6301NX

6301NX

6301NX

EB-6301 (wall mounting bracket) is sold separately.

6301NX

6301NX

The latest series of the 6301, a compact active monitor speaker that has been used for more than 30 years in broadcast facilities and small-scale loudspeakers. The lineup includes four models with different input specifications.

Features

● Monitor speaker with built-in amplifier for use in various types of audio monitoring and small-scale loudspeaker applications.

Cone-type 10cm full-range speakers are used to achieve stable sound.

Built-in power amplifier with a rated output of 20W delivers stable sound even in a small package.

All models are equipped with a Class-D (PWM) power amplifier. Compared to the previous model (6301B-H series), power consumption has been reduced while the rated output has been increased from 10W to 20W. The eco-friendly design includes a standby mode (compliant with Europe’s ErP Directive).

In the standby mode, power consumption is reduced to 0.5W or less after the input signal level remains below a certain level for about 25 minutes. When the input signal level exceeds a certain level, the unit instantly returns from standby mode to normal mode.

The playback frequency bandwidth is extended from 80 to 13,000 Hz in the previous model to 70 to 15,000 Hz.

The power cable is an inlet type.

The power cable is an inlet type. *The product warranty is applicable only when the product is used in Japan.

The same width and height as the previous model (6301B-H series) are adopted, allowing replacement without changing the installation location.

● Robust die-cast aluminum enclosure is used.

Four models with different input specifications are available for different applications.

6301NB】

Equipped with unbalanced analog input.
【6301NE】

Equipped with balanced analog input (electronically balanced) and unbalanced analog input.
6301NX

Equipped with balanced analog input (transformer type) and unbalanced analog input.
6301ND

Equipped with AES/EBU digital input/through output and unbalanced analog input.

Wall mounting and angle adjustment are possible by using the optional EB-6301 wall mounting angle.

Specifications

Main Specifications

Speaker section
Enclosure type

Closed type (Material: Aluminum die-casting)

Unit

Cone type 10cm full range unit x 1

Frequency response

70Hz to 15kHz

Sound Pressure Level

85dB/W(1m)

Maximum Sound Pressure Level

98dB

Amplifier section
Rated output

20W

Analog input

Unbalanced: Φ6.3mm (1/4″)  TS phone, input sensitivity -14dBV (0.2Vr.m.s.), input impedance 10kΩ min.

Balanced: XLR-3-31 type, input sensitivity: +4dBu (1.2Vr.m.s.), input impedance 10kΩ min.

T.H.D.

0.05% (at 1kHz/1W output)

Residual noise

-70dBV

Guaranteed Operating Environment
Temperature

-10°C to +50°C

Level of humidity

Within 90%

general
External Dimensions

120(W)×189(H)×120(D) mm

(including maximum projection)

Weight

2.27kg

Power requirement

AC100-230V (50/60Hz)

Power consumption

10W (in standby mode: 0.5W or less / compliant with European ErP Directive)

Accessories

Power cable (2m)

External dimensions (common to all four models)

Input Specifications by Model

Product name back panel Digital input Analog Input
(Balanced 2nd H)
Analog Input
(unbalanced)
6301NB ×x-mark (used to indicate an incorrect answer in a test, etc.) ×x-mark (used to indicate an incorrect answer in a test, etc.) Φ6.3mm (1/4") TS phone
6301NE ×x-mark (used to indicate an incorrect answer in a test, etc.) XLR-3P-Electronic Φ6.3mm (1/4") TS phone
6301NX ×x-mark (used to indicate an incorrect answer in a test, etc.) XLR-3P-Transformer type Φ6.3mm (1/4") TS phone
6301ND AES/EBU (XLR-3P)
Source selection (L/L+R/R)
THRU jack (XLR-3P)
×x-mark (used to indicate an incorrect answer in a test, etc.) Φ6.3mm (1/4") TS phone

When plugged into a φ6.3 mm (1/4") TS phone unbalanced analog input, input signals to other input terminals are blocked.

*This product complies with the European RoHS Directive.

Support

Product Materials

Various product documents are available for download.
Acrobat Reader is required to view PDF files.

The user manuals, product specifications, and product images may be used free of charge for both commercial and non-commercial purposes, but the copyright belongs to our company.
(No permission application or credit notation such as product names is required for their use.)
Selling, leasing, renting, or redistributing the product is prohibited. (No permission application or credit notation of the product name, etc. is required for use of the image.