6301BX-H
Personal Monitor
With optional 9610 (mounting angle/¥3,000 excl. tax) installed.
Compact powered monitors with built-in amplifiers for production, broadcasting, and small-scale loudspeaker applications. Four models are available for different applications.
The 6301B series will be replaced by the 6301N series.
The 6301B series is available while supplies last; the 6301B series lineup will continue with the 6301N series.
For more information, please visit the 6301N series website.
Features
Personal monitor with built-in AV-compatible amplifier that can be used for a wide range of monitoring purposes.
Direct connection to recorder/electronic instrument outputs, mixer monitor outputs, etc.
Adopts a magnetically shielded unit that has little effect on video monitors and magnetic tapes.
Built-in 10W power amplifier. Easy audio monitoring.
Equipped with an EXT SP terminal for connecting external speakers (when external speakers are connected, the built-in speaker is muted).
The 6301D is not equipped with this terminal.
Built-in auto-reset protection circuit that works against momentary overloads caused by short circuits when connecting inputs/outputs, turning on power, or using external speakers, etc.
● Robust die-cast aluminum enclosure.
●6301D is equipped with AES/EBU digital input/through output and unbalanced analog input.
The digital input can be selected (L/L+R/R) with the switch on the rear panel.
The 6301B-H has unbalanced analog inputs.
6301BX-H has balanced analog input (transformer type) and unbalanced analog input.
6301BE-H has balanced analog input (electronically balanced) and unbalanced analog input.
Specifications
Main Specifications
| model (e.g. of a vehicle) | encapsulated type |
|---|---|
| Speakers used | 1 x 100mm cone full range (magnetically shielded) |
| Playback frequency band | 80Hz to 13kHz |
| Output Sound Pressure Level | 84dB/W(1m) |
| Maximum Output Sound Pressure Level | 97dB |
| input terminal | XLR-3-31 type (No.2 HOT)/balanced and 6mm dia. phone jack/unbalanced |
| output terminal | 6mm dia. phone jack (external SP output) |
| Input impedance | 10kΩ min. |
| Rated output | 10W |
| T.H.D. | 0.05% (at 1W output) |
| residual noise | -70dBV (0.3mW) |
| Minimum input sensitivity (at maximum output) B-H | +4dBu (1.2Vr.m.s.) |
| Enclosure Material | Aluminum Die Casting |
| External dimensions | 120(W)×189(H)×137(D) mm |
| Power consumption | 30W |
| Mass B-H | 2.79kg |
| power cord | Approx. 2.0m |
List of Input/Output Specifications by Product
| Product name | Digital input | Analog Input (Balanced 2nd H) |
Analog Input (unbalanced) |
EXT SP output | power cable |
|---|---|---|---|---|---|
| 6301D | AES/EBU (XLR) | ×x-mark (used to indicate an incorrect answer in a test, etc.) | ø6mm phone | ×x-mark (used to indicate an incorrect answer in a test, etc.) | inlet type |
| 6301B-H | ×x-mark (used to indicate an incorrect answer in a test, etc.) | ×x-mark (used to indicate an incorrect answer in a test, etc.) | ø6mm phone | ø6mm phone | Straight out (approx. 2 m) |
| 6301BX-H | ×x-mark (used to indicate an incorrect answer in a test, etc.) | Transformer type (XLR) | ø6mm phone | ø6mm phone | Straight out (approx. 2 m) |
| 6301BE-H | ×x-mark (used to indicate an incorrect answer in a test, etc.) | Electronic (XLR) | ø6mm phone | ø6mm phone | Straight out (approx. 2 m) |
*This product complies with the European RoHS Directive.