GX102

Expanding on the pure magnesium HR scorcher technology developed for the G2000, we have developed a diaphragm made of an aluminum alloy molded into an HR shape.

This allows resonance caused by split vibration to be dispersed, maximizing the sound quality of the high propagation velocity diaphragm and achieving high-density, habit-free, and straightforward reproduction of the fundamental frequency range.
The best matching of the enclosure and the network also provides bass reproduction that is beyond its class, and allows you to hear a bass performance with a clear attack and thickness.

HR (HP ROTATION) is a circumferential rotation of the HP (HYPERBOLIC PARABOLOIDAL) shape, known in the field of building structural mechanics, in order to further improve it.
This shape is ideal for metallic materials with low internal loss, as it disperses resonance caused by split vibrations, while providing light weight and high rigidity.

*As of January 2009, according to our own research.

By forming the magnesium alloy, which has the second best characteristics next to pure magnesium, into a dome shape with ridges, the resonance caused by split vibrations can be dispersed as in a woofer, maximizing the sound quality of the high propagation velocity diaphragm.

You can hear the soft voice of a female vocalist or the resonance of a violin with rich overtones.

*As of January 2009, according to our own research.

The same MID controller as the G series is used.
By fine-tuning the frequency range of 1.6kHz to 6kHz, which is near the most sensitive bandwidth of the auditory sense, in the range of +1dB to -2dB, it is possible to adapt to changes in the playback environment and diverse tastes.
Since the circuit configuration is such that signals flowing through the controller do not flow to the tweeters, there is almost no deterioration in sound quality.

The network components consist of an air-core coil and high-quality film capacitors.
The tweeter series capacitor, which is particularly important, uses a newly developed film capacitor with copper/silver alloy concentric stranded wire, which was developed for the G2000.
The input terminal is a machined gold-plated copper terminal with low contact loss.
The internal wiring uses copper/silver alloy concentric twisted wires, and the contact points are caulked with gold-plated sleeves to prevent deterioration of sound quality.

The acoustical plywood developed for G2000 is made of alternately laminated camphor wood and eucalyptus wood, resulting in a high sound quality plywood with high strength and natural sound with low vibration damping.
The baffle, top, bottom, left and right sides are made of this high sound quality plywood, and the back plate is made of MDF, furthermore, by optimizing the thickness of each part, the unit is held firmly to achieve rich sound quality with high clarity.