HP-V1
Vacuum Tube Portable Headphone AmplifierPortable headphone amplifier with rich texture achieved by using vacuum tubes in the front stage of the amplification section and original Fostex capacitors.
Features
Headphone amplifier that can be connected to audio equipment with a line output to output headphones.
The input terminals are equipped with two 3.5mm stereo mini phone plugs at the front and rear, suitable for connection to portable audio players.
A HiFC 3.5mm stereo mini phone cable is included as standard.
![](https://www.fostex.jp/cms/wp-content/uploads/2014/08/HP-V1_6N16B-Q_02.jpg)
The headphone amplifier consists of a vacuum tube (6N16B-Q) in the first stage of the amplification section and an OPAMP in the second stage.
![](https://www.fostex.jp/cms/wp-content/uploads/2014/08/HP-V1_05_02.jpg)
For coupling capacitors, Fostex’s original large film capacitors and electrolytic capacitors are used, which are the result of speaker system network technology cultivated over many years.
![](https://www.fostex.jp/cms/wp-content/uploads/2015/04/Set_iPhone_P1_V1.jpg)
Image shown is for reference only; HP-P1 and iPhone are not included.
A wide range of headphones can be supported by the Hi/Lo gain switch.
Built-in lithium-ion battery can operate for about 10 hours.
Lightweight and rugged aluminum body for portable use.
Specifications
Main Specifications
input | |
---|---|
line input | |
connector | Φ3.5mm stereo mini phone jack (mounted on front and rear sides *Priority is given to the front side.) |
Applicable load impedance | 10kΩ min. |
output (e.g. of dynamo) | |
headphone output | |
connector | Φ3.5mm stereo mini phone jack |
Maximum output | 200mW (at 32Ω load) |
Applicable load impedance | 16 Ω min. |
frequency response | 20Hz to 100kHz within ±2dB |
general | |
External dimensions | 88(W)x33(H)x139(D)mm * including protrusions |
Mass of main unit | Approx. 390g |
power (button on TV, etc.) | Built-in lithium-ion rechargeable battery / External DC15V |
Power consumption | 4W (at 32Ω load) |
Built-in battery operation time | Approx. 10 hours |
startup (interval of) time | Within 1 minute (until headphone output level stabilizes) |
accessory | AC adapter (AD15-3200) x 1, HiFC stereo mini cable x 1, Instruction manual x 1, Safety precautions x 1 |
*HiFC is a registered trademark of Hitachi Metals, Ltd.
iPhone is a trademark of Apple Inc. registered in the U.S. and other countries.
Specifications and appearance are subject to change without notice.
This product is compliant with the European RoHS Directive.