PH-100
headphone distributor
10-channel headphone distributor with high output of 500mW.
Features
High output power 500mW headphone outputs with front volume are provided at the front and rear (front priority). A single unit can monitor 10 headphones simultaneously.
XLR type/+4dBu balanced and TRS phone/ -10dBV balanced inputs, and RCA pin/ -10dBV unbalanced inputs are provided.
The input level can be adjusted with the front volume control (equipped with input peak indication). Stereo/monaural switching is also available.
A front-volume AUX IN (for both stereo and monaural) is provided.
The AUX IN can be used as a cue box, allowing the musician to adjust the volume of a specific source that has been folded back in.
The output for cascading is provided to enable connection of multiple units. This allows the unit to be used for headphone monitoring of more than 10 people (up to 10 units can be cascaded), for example, for language study in a classroom or for various facilities/events.
The channel in outputs can be directly interrupted to each headphone output. Cue-outs from the monitor console can be connected for talkback and other applications.
Specifications
Main Specifications
| Balanced input (L,R) | |
|---|---|
| connector | XLR-3-31type (×2, No.2 HOT), φ6mm TRS phone jack (×2) |
| Input impedance | 10kΩ min. |
| Reference Input Level | +4dBu (XLR), -10dBV (TRS phone) |
| Unbalanced input (L/MONO,R) | |
| connector | RCA pin jacks (x 2) |
| Input impedance | 10kΩ min. |
| Reference Input Level | -10dBV |
| AUX IN (L/MONO,R) | |
| connector | RCA pin jacks (x 2) |
| impedance | 10kΩ min. |
| Reference Input Level | -10dBV |
| Channel in (1-10) | |
| connector | RCA pin jacks (×10) |
| Input impedance | 10kΩ min. |
| Reference Input Level | -10dBV |
| PHONES OUT (1-10: Equipped on FRONT/REAR, FRONT priority) | |
| connector | 6mm dia. stereo phone jack (×20) |
| Applicable load impedance | 8 to 32 ohm or more |
| Maximum output | 500mW |
| frequency response | 30Hz to 20kHz (TYPICAL) |
| distortion rate | 0.3% or less |
| CASCADE OUT (L,R) | |
| connector | RCA pin jack |
| Reference Output Level | -10dBV |
| distortion rate | 0.1% or less |
| general | |
| External dimensions | 482(W)×49(H)×267(D)mm (including maximum projection) 1U |
| Mass of main unit | Approx. 4kg |
| power (button on TV, etc.) | AC100V 50/60Hz |
| Power consumption | 18W |