6301DT
Active Speaker
The 6301 series of compact active loudspeakers, which have been used for more than 30 years in broadcast facilities and small-scale loudspeakers, is now available in a model compatible with the Dante®* audio network standard.
Features
The compact design common to all series allows for space-saving installation.
Cone-type full-range speakers are used to achieve stable sound.
●Rugged die-cast aluminum enclosure is used.
Flat design with minimal protrusion of switches and knobs to prevent damage even in the event of a fall.
●Switching power supply circuitry compatible with 100 VAC to 240 VAC power supplies.
The product warranty is limited to use in Japan.
Either or both of the 2-channel digital signals extracted from the Dante® network signal can be output.
●Incorporates Dante® Ultimo chip. Supported sampling frequencies: 44.1/48/88.2/96 kHz
●An optional wall-mounting angle (EB-6301) allows for angle adjustment and wall mounting.
Dante® is a registered trademark of Audinate, Inc.
Specifications
Main Specifications
| Speaker section | |
|---|---|
| Enclosure type | Closed type (Material: Aluminum die-cast) |
| Unit | Cone type 10cm full range unit x 1 |
| Frequency response | 70Hz to 15kHz |
| Sound Pressure Level | 85dB/W(1m) |
| Maximum Sound Pressure Level | 98 dB |
| Amplifier section | |
| Rated output | 20W |
| Input connector | Analog unbalanced/Φ6.3 mm (1/4″) TS phone, Dante/RJ45 (CAT5e or better) |
| T.H.D. | 0.05 % (at 1 kHz 1 W output) |
| Residual noise | -65 dBV |
| general | |
| External Dimensions | 120(W)×189(H)×120(D)mm *including maximum projection |
| Weight | Approx. 2.3 kg |
| Power requirement | AC 100 V to 240 V, 50/60 Hz |
| Power consumption | 10 W *This product does not have an auto-standby function. |
| Accessories | Power cord (approx. 2 m) × 1 |
External dimensions
*This product complies with the European RoHS Directive.
