AP15mk2
Personal Amplifier
A compact-sized personal amplifier that improves on its highly popular predecessor model, adding even higher sound quality and an auto-standby function.
Features
Reduces distortion and residual noise for even higher sound quality
The AP15mk2 is a compact personal amplifier equipped with a 15W+15W digital amplifier. Based on its highly acclaimed predecessor, the AP15mk2 has undergone significant changes, from the devices it incorporates to the layout of each component, to improve distortion and residual noise performance, resulting in an even clearer, higher quality sound.
Eco-friendly design. Equipped with an auto-standby function that automatically reduces power consumption.
The auto standby function conforms to the European EcoDesign Directive for environmentally deployable design. When the input to the unit remains at no signal or near signal level, it automatically switches to standby mode and reduces power consumption to 0.5W or less. This function can be turned ON/OFF and the time until the standby mode is activated can be set to either 1 minute or 12 minutes using the dipswitch on the bottom of the unit, depending on the operating environment and the intended use of the unit.
Specifications
Main Specifications
| Maximum output | 15 W + 15 W |
|---|---|
| Applicable load impedance | 4 ohm to 8 ohm |
| frequency response | 20 Hz to 20 kHz |
| Total Harmonic Distortion | 0.05% (10 W output, 4 Ω load, 1 kHz) |
| S/N Ratio | 90 dB or more |
| input terminal | Stereo mini-jack (1 channel), RCA (1 channel) / Input sensitivity: 300 mV |
| power (button on TV, etc.) | DC 15 V (dedicated AC adapter included) |
| Power consumption | 45 W (max), 0.5 W or less (standby) |
| External dimensions | 110 mm (W) x 30 mm (H) x 75 mm (D) *including maximum protrusion |
| Mass of main unit | Approx. 250 g |
| accessory | AC adapter x 1, speaker cable (1.5m) x 2, stereo mini cable (0.8m) x 1, stereo RCA cable (1.5m) x 1 |
Dimensions
Attention
*Do not use any power source other than the AC adapter supplied with the unit.
*Connect a speaker or speaker system with an impedance of 4 to 8 ohms directly to one output of this unit.
*The device that can be connected to the output of this unit is a passive speaker unit or speaker system without an amplifier. Do not connect the inputs or outputs of other devices (amplifiers, etc.).
*The auto standby function may not operate properly depending on the output noise level of the playback device connected to the input terminals of this unit.
*The standby mode may operate when the volume on the playback device is being used at a low level (low volume). In this case, raising the volume of the playback device may improve the problem.
Please use the power switch that doubles as the volume volume control of the main unit to turn the power on and off; turning the power on and off with a switch on a power strip or the like to which the AC adapter is connected may damage this product or the connected speakers.
Stereo mini-jacks have priority for input, and simultaneous input with RCA pin jacks is not allowed.
This product is intended for private use by individuals. We do not guarantee the operation or performance of this product for professional use or equipment use, nor do we apply our product warranty policy.
*This product complies with the European RoHS Directive.
