BK168NS
speaker box16cm back-loaded horn speaker box
Fully made-to-order
Features
This back-loaded horn speaker box is specially designed for the FE168NS, incorporating terminals, internal wiring, and sound-absorbing material for sound quality control, etc. Simply connect the internal wiring of the BK168NS to the FE168NS and install with the included screws to enjoy excellent sound quality, rich bass, and wide dynamic range music reproduction. The BK168NS is a back-loaded horn speaker box specially designed for the FE168NS.
The input terminal is a gold-plated terminal compatible with banana plugs. The internal wiring uses the same OFC same-core stranded wire as the core wire of our SFC103 to reduce sound quality degradation from the input terminal to the speaker unit.
The use of linden plywood, which is suitable for acoustic use, realizes rich resonance and natural reverberation.
The finish is a beautiful and soothing walnut veneer.
The horn aperture is set at the front, and the horn road has an expansive structure similar to an exponential curve, allowing the user to enjoy a powerful back-loaded horn sound that is both tight and high-speed.
This product is made to order, so it takes 1.5 months or more for delivery.
Specifications
Main Specifications
form (something takes) | back-loaded horn type |
---|---|
External dimensions | 246 (W) x 918 (H) x 475.5 (D) mm |
mass | 18.5kg |
Horn length | Approx. 190 cm |
Air chamber volume | 5.9L |
Crossover frequency (fx) | Approx. 150 Hz *The point where the reproduced sound that the speaker unit can produce from the internal volume of the back-loaded horn air chamber alone and the reproduced sound (bass) from the horn connect. |
material properties | Linden plywood/t18 |
finishing touches | Walnut veneer + clear coating |
Compatible units | FE168NS |
accessory | Washers × 8 pcs. M5 L30 cap bolt x 8 pcs. L wrench × 1 Grille x 1 |
External Dimensions
![](https://www.fostex.jp/cms/wp-content/uploads/2018/11/BK168NS_size-671x480.jpg)