C045A8
Full Range Speaker
Sales unit is 1 box (20 units).
Features
Lightweight design with neodymium magnets and glass fiber reinforced plastic fram
The magnetic circuit, which employs neodymium magnets, is an internal magnetic type with low flux leakage and minimal impact on peripheral devices.
Diaphragm design less susceptible to water splashes
The surface of the diaphragm is splash-proof (*) to prevent harmful effects from water splashes.Can be incorporated into outdoor audio guidance systems, etc.
The speaker unit is installed on the structure as shown in the photo below, and only the surface of the speaker is exposed to the outside, making it splash-proof (IPX4).
UDR tangential edge reduces excessive amplitude for high input resistanc
Smooth characteristics are achieved even at high volume levels due to its high structural strength and resistance to specific peaks.
Faston #205 terminal lugs are used for both positive and negative poles
Smooth characteristics are achieved even at high volume levels due to its high structural strength and resistance to specific peaks.
Faston #205 terminal lugs are used for both positive and negative poles
Specifications
Main Specifications
| model | 4.5 cm cone full range |
|---|---|
| Nominal Impedance | 8 Ω |
| fs (F0) | 320 Hz |
| Reproduction Frequency Response | f0~40 kHz |
| SPL (1m/1W) | 79 dB/1 w(m) |
| Input | 5 W(NOM) |
| Mo | 0.79 g |
| Qo | 1.78 |
| Effective vibration radius (a) | 3.4 cm |
| VAS | 0.05 L |
| Net Weight | 31 g |
| Baffle Hole Diameter | Φ44 mm |
| Waterproof grade | IPX4 (Note: Not supported as a standalone unit. Compatible when installed as shown in the above figure) |
Frequency Response Chart
