FE208-Sol
20cm full rangeInheritance of Sol Overwhelming D range
20cm cone full-range unit
*Limited number of units have been sold out.
Features
Inheritance of Sol Overwhelming D range
The FE208-Sol is supported by a two-layer ES cone and a low-distortion, large ferrite external magnetic circuit for sensitive and expressive music reproduction. The ultra-strong magnetic circuit has an overwhelming dynamic range and an output sound pressure level in excess of 100 dB.The ultra-strong magnetic circuit has an overwhelming dynamic range, an output sound pressure level in excess of 100 dB, and ultra-overdamping characteristics.
Therefore, enclosures designed for conventional models may not provide sufficient bass reproduction.
Two-layer paper ES cone
The newly designed cone paper is made of two-layer ES cone paper with thin, flexible, high-density fibers, which further improves rigidity and retains internal loss despite its light weight. The base layer is made mainly of long-fiber pulp to achieve both high rigidity and internal loss, while the surface layer is made of short-fiber pulp to increase the propagation speed on the diaphragm surface. The surface layer contains short-fiber pulp to increase the propagation speed of the diaphragm surface. This enables reproduction of sharp highs and thick lows with good rise time, while maintaining the bright and taut tone in the mid-range.
The two-layer papermaking is a unique technology in which the diaphragm is made in two stages, with the base layer and surface layer making up a single diaphragm.
Highly rigid aluminum die-cast frame
A highly rigid aluminum die-cast frame is used to support the large ferrite magnetic circuit and to prevent unwanted vibrations from being transmitted to the enclosure.
High Compliance Corrugated Damper
To improve linearity, a high-compliance corrugation damper is used, which has little change in stiffness from small to large inputs, and has excellent movement.
3-point adhesion method
A three-point bonding method is employed where the cone paper, damper, and voice coil are bonded at the same point. The high frequency characteristics are improved by increasing the strength of the cone neck.
Faston 205 gold-plated terminals
Faston 205 type low-loss gold-plated terminals are used for input terminals. This ensures secure joints of speaker cables and prevents deterioration of sound quality.
Specifications
Main Specifications
form (something takes) | 20cm cone full-range unit |
---|---|
impedance | 8Ω |
Lowest resonant frequency | 43Hz |
Playback frequency band | f0~20kHz |
Output Sound Pressure Level | 96dB/1w(m) |
Input (MUS.) | 100W (NOM.35W) |
m0 | 14.3g |
Q0 | 0.15 |
Effective vibration radius | 8.1 cm |
Magnet mass | 3672g (1836g x 2pcs.) |
mass | 8.7kg |
Baffle opening dimensions | 186mm dia. |
accessory | Wood screws x 8 Onime nuts × 8 pcs. L wrench x 1 Packing x 1 piece OFC cable x 2 pcs. |
frequency response
FE208-Sol
![](https://www.fostex.jp/cms/wp-content/uploads/2017/09/FE208-Sol_FreqResponse.jpg)
External dimensions
![](https://www.fostex.jp/cms/wp-content/uploads/2017/09/FE208-Sol_external-dimensions_.jpg)