LM16

The excellent panel design of an analog mixer, which allows you to grasp the mix status at a glance and edit it quickly, has been realized in a 16-channel digital mixer. The separation of the control section and input/output section, which is only possible with digital mixers, dramatically improves the flexibility of installation at the PA site.

The mixing control unit and main unit (input/output section) can be separated for up to 50 meters. Input/output wiring is done at the main unit placed at a remote location, such as on the stage side, and connection to the control unit for mixing operation is completed with a single LAN cable, dramatically increasing the degree of freedom of setting locations in the field.

The control unit (8U) and main unit (3U) can be rack-mounted or used as a single unit. This allows for flexible setup according to your needs.

Inputs are equipped with XLR-PHONE combo type connectors for mic or line connections. Phantom power can be turned on and off in groups of 1 to 8 or 9 to 16 channels.

A low-cut filter (80Hz,-12dB/oct.), analog limiter, and digital controlled trim allow optimal input level adjustment.

Inputs 1-8 are equipped with insert jacks to allow connection of external effects devices such as comps/limiters.

All inputs are equipped with 3-band EQ (HIGH: 12 kHz / MID: 100 Hz to 8 kHz / LOW: 80 Hz, ±18 dB), enabling sound creation to match the sound source.

Equipped with AUX sends 1-3 and an EFFECT send output terminal, allowing the use of external effectors and connection of stage monitors.

A unique digital effector is built in, with 12 effect types (reverb/delay) to choose from.

Equipped with output terminals for groups 1 to 4, it flexibly supports connection of an external mixer, etc.

The control unit is equipped with a SUB IN terminal (assignable to any input channel), a monitor output terminal, and a headphone terminal for input from CD players and media players.