T60RP(WN)
RP Stereo HeadphonesThe T60RP is a special edition model that uses a housing made of solid walnut, a high-grade wood.
T60RP special edition model with a housing made of solid black walnut.
Limited quantity available on amazon.co.jp.
![](https://www.fostex.jp/cms/wp-content/uploads/T60RPWN_banner-980x399.jpg)
The T60RP is based on the T60RP, which realizes a new RP sound by optimizing the RP diaphragm, which has been recognized by musicians and engineers around the world as a monitor headphone, for listening purposes. The T60RP is a special limited edition model with a housing made of solid black walnut, which is also used in the TH610 premium headphones.
Features
![](https://www.fostex.jp/cms/wp-content/uploads/2017/12/01_351670_assy-300x143.jpg)
Equipped with our original RP diaphragm, which is made of highly heat-resistant polyimide film as base material and etched with copper foil.
The driver unit uses a neodymium magnet to provide a wide reproduction bandwidth, excellent transient characteristics, and high input resistance up to 3000mW.
![](https://www.fostex.jp/cms/wp-content/uploads/T60RPWN_housing-300x191-300x191.jpg)
The housing is made of solid black walnut, a high-grade wood, machined from solid walnut.
The RP diaphragm offers a rich sound quality with added depth and luster to the delicate expressiveness of the RP diaphragm.
![](https://www.fostex.jp/cms/wp-content/uploads/2015/08/RP_magnetfield-300x226.jpg)
The yoke is made of a new material with less than half the carbon content of conventional materials to improve the efficiency of magnetic transmission.
One of the main features of the RP magnetic circuit is that “a large effective magnetic flux density is obtained by repelling the upper and lower magnets, and the diaphragm is sandwiched between them. This enables the RP magnetic circuit to “obtain a symmetrical magnetic flux density distribution with respect to the vibration direction of the diaphragm” and succeeds in achieving overwhelming linearity.
![](https://www.fostex.jp/cms/wp-content/uploads/2017/12/EX-EP-RP60_web-300x187.jpg)
Low-resilience around-the-ear ear pads are used.
Around-the-ear earpads are designed to provide a comfortable fit, even over long periods of listening.
![](https://www.fostex.jp/cms/wp-content/uploads/2017/12/ET-RP3.5UB__6.3connector_web-300x294.jpg)
Balanced connection is also supported for use in different environments.
The cable uses a high-quality OFC conductor. It delivers high resolution and crisp sound in all bandwidths.
Three types of balanced cables are also sold separately. (φ2.5: ET-RP2.5BL, φ4.4: ET-RP4.4BL, XLR: ET-RPXLR)
Specifications
Main Specifications
Type | Semi-open RP dynamic |
---|---|
Frequency response | 15 to 35,000 Hz |
Impedance | 50Ω |
Sensitivity | 92dB/mW |
Maximum input | 3,000mW |
Weight | Approx. 400g (excluding cord) |
Accessories | Φ3.5mm (4-pole) ⇔ Φ3.5mm (3-pole) stereo phone cable (1.5m) x 1, Φ3.5mm → Φ6.3mm stereo |
wiring diagram
![](https://www.fostex.jp/cms/wp-content/uploads/2017/12/T60RP_PLUG_ASSIGN.jpg)
*When using the headphones, please refrain from using them for long periods of time and use them at a moderate volume to avoid ear irritation.
This product complies with the European RoHS Directive.